Alberta Commercial Driving Class 1 Practice Test Part 1

Embark on your motorcycle journey with confidence by taking our free Alberta motorcycle test. Discover the essential knowledge and skills required for safe and responsible riding on Alberta’s roads. Our comprehensive practice test covers everything from traffic rules to proper handling techniques, helping you prepare for the official examination. Whether you’re a new rider or looking to refresh your knowledge, our resource is designed to support your success. Don’t miss this opportunity to enhance your riding skills and boost your road safety awareness. Take the first step towards becoming a licensed motorcycle rider in Alberta – try our free Commercial test now.

Created on April 20, 2023 By

canadiandrivingtest

Alberta Commercial Drivers Class 1 Practice Test Part 1

1 / 31

According to this Provinces Hours of service legislation, under which of the following conditions would a driver not be allowed to drive?

If he/she has already driven 10 hours during that shift

If he/she has had more than 3 work shifts that week

If road conditions are dangerous

If he/she has already been on-duty for 15 hours

2 / 31

Which of the following statements about a carrier's Safety Plan is correct?

Each driver should receive training specified in the company's safety plan and know how to perform their duties properly and safely

Experienced drivers do not need to receive as much training in defensive driving, load security and trip inspections as newer drivers.

Drivers are responsible for ensuring that the vehicle is being operated in accordance with the owner's policies, regardless of what the law states

Drivers do not need to have documentation such as Bills of Lading and Dangerous Goods documents in their possession as long as the company has a copy

3 / 31

Carriers operating a tractor outside of this Province are required to obtain a Safety Fitness Certificate if the vehicle weighs in excess of:

4,500 kilograms

Safety Fitness Certificates are only required for trucks and trailers

4,000 kilograms

5,000 kilograms

4 / 31

When inspecting the airlines on a vehicle with air brakes during a pre-trip inspection, you should:

Ensure there are no cuts, abrasions or cracks in the air lines

Check the temperature

Measure the pressure

Calibrate the air lines

5 / 31

What is the minimum seating capacity (including the driver) for a commercial vehicle to be considered a 'bus' under the Traffic Safety Act?

6 / 31

A “Q” endorsement is placed on ____________ driver’s licence when a driver successfully completes an approved by Province air brake course through an authorized organization.

Class 2

Class 1

Any class of

Class 3

7 / 31

What does having the 'S' condition code on Class 1, 2, or 4 licences signify?

The driver has obtained a Safety Fitness Certificate

The driver has been authorized to operate a vehicle carrying oversized loads

The driver has completed the School Bus Driver Improvement Program

The driver has qualified to tow a semi-trailer from a motor vehicle with three or more axles

8 / 31

Which of the following is required to upgrade from a Class 5 to a Class 4 licence?

Vision assessment

Medical form completed by a doctor

All answers are correct

Knowledge test

9 / 31

Which of the following is exempt from the requirement to obtain an SFC under provincial law?

Taxi drivers

Ambulance drivers

Farmers

Any carrier that does not transport dangerous goods

10 / 31

When is an air brake 'Q' endorsement required?

Neither a nor b

When taking the road test for a Class 3 licence with a single motor vehicle with three axels

Both a and b

When driving a single motor vehicle registered as a farm vehicle

11 / 31

What is the maximum time a driver has to deliver a daily log to the employer under this Province's Hours of service legislation?

One month

25 days

Two months

20 days

12 / 31

When inspecting the power steering pump and hose during a pre-trip inspection, you should check for the following:

Cleanliness

Adequate tension

Leaks and fluid level

Proper alignment

13 / 31

Which of the following is true of a truck registered for a weight of 10,000 kilograms being driven solely in this Province?

According to provincial law, the carrier must obtain a Safety Fitness Certificate because of the weight of the vehicle

Federal law applies because the vehicle is weighing in excess of federally designated threshold

The driver is not required to obtain a Safety Fitness Certificate for the reason that the vehicle is not being operated outside of the province

If the carrier wished to tow a trailer weighing 2,000 kilograms, he/she would be required to obtain a Safety Fitness Certificate

14 / 31

To safely make a right turn in a large vehicle, it is recommended that you:

Allow your rear wheels to mount the curb if there is no obstruction

Drive well into the intersection before starting the turn

Allow for high speed off-tracking to counteract the centrifugal force

Veer into the left lane before making your turn to give yourself more space to turn

15 / 31

Which is not one of the four conditions for having the daily log requirement waived under Alberta's Hours of service legislation?

There are fewer than 8 hours of on-duty driving time during a shift

The driver stays within a 160km radius of the home terminal

The driver starts and ends the work shifts at the same place

The work shift does not exceed 15 hours

16 / 31

Which of the following belts should you check during a pre-trip inspection:

All belts on the front of the engine

Water pump belt

Alternator belt

Power steering belt

17 / 31

Which of the following statements about the federal Hours of service regulations is true?

During a work shift a driver is not permitted to drive more than 13 hours

The federal regulations are less restrictive than the Alberta regulations

In each day a driver must take 10 hours of consecutive off-duty time

Drivers can change between cycle 1 and cycle 2 as long as they notify their carrier

18 / 31

To safely complete a left turn in a large vehicle, it is recommended that you:

Use engine compression to control your speed during the turn

Use a fixed hand steering method to maintain control of the vehicle

Ensure a wide enough turning arc to allow the vehicle to off-track on left side without crossing the centre line

Merge into the farthest right as soon as your turning arc is complete

19 / 31

Low-speed off-tracking:

Is when the rear tires pull outward from the steering path

Is when centrifugal force is greater than traction when entering a curve

Is when the rear tires are pulled inward of the steering path

The driver makes a right turn

20 / 31

What is a possible disciplinary action assessed to a carrier due to failing to follow a written safety program?

Mandatory completion of a special safety course

Immediate loss of licence to operate that type of vehicle

Designation as a high-risk carrier

Charges laid in court

21 / 31

What is not included in the official definition of a semi-trailer?

It has axles either at its front or rear ends

While being towed, it is supported at its front end by the truck tractor or the immediately preceding trailer

When connected to the truck tractor or preceding trailer, it is connected by means of a kingpin and a fifth wheel

It has axles only at or near its rear end

22 / 31

Which of the following is not required as part of a carrier's Safety Plan?

Policy and procedures related to driver training responsibilities

Instructions for the use of safety equipment

Daily evaluation of each driver's knowledge of existing safety laws

Retention of complete records for each driver in accordance with regulations

23 / 31

What lights would not be found at the rear of the vehicle of a bus?

Clearance and marker lights

Alternating amber and red flashing lights

White flashing strobe light

All of these lights would be found at the rear

24 / 31

When performing the pre-trip inspection for a truck-tractor or three-axle vehicle, it is essential to verify the following:

That the slack adjuster moves at least a few inches when you pull on it

That with the fifth wheel coupling there is visible space between the plate and the apron

That first drive axle tires have a tread depth of no more than 1.6mm

That the axle assembly has not breaks, cracks, holes, broken seals or bends

25 / 31

What is required for this province's Safety Fitness Certificate to be valid in other Canadian jurisdictions?

The registered vehicle must have Alberta plates

The carrier must declare that they are a federal company

The registered vehicle must have Alberta plates AND the carrier must declare that they are a federal company

The registered vehicle must have Alberta plates OR the carrier must declare that they are a federal company

26 / 31

Qualifying for an air brake endorsement is mandatory to obtain what type of licence?

Class 4

Class 3

Class 1

Class 2

27 / 31

Which of the following statements about long combination vehicles is incorrect?

The heaviest trailer should always be hooked up directly to the tractor

Drivers of LCV should allow for maximum following distance

In order to be issued with a Longer Combination Vehicle Driver's Certificate, a driver must not have had any prior moving violations

The maximum speed limit for drivers of long combination vehicles should never be more than 100km/h

28 / 31

Which of the following statements about operating passenger vehicles is correct?

None of them

If you have a Class 2 licence, you can operate a motor vehicle that has a seating capacity of no more than 24 people

If you have a Class 4 licence, you can operate a vehicle with a maximum seating capacity of 24, excluding the driver

If you have a Class 4 licence, you cannot operate a vehicle with a seating capacity of more than 15 people, excluding the driver

29 / 31

Which of the following statements is true about the holder of a Class 3 operator's licence?

He/she can transport passengers for hire as long as the motor vehicle has a seating capacity of less than 15 people

He/she may operate all motor vehicles under Classes 1, 2, 4 and 6 for learning only

He/she can operate a single motor vehicle with three or more axles towing any type of trailer with one or more axles

He/she may operate any motor vehicle or combination of vehicles that the holder of a Class 5 operator's licence may operate

30 / 31

What is the difference between an A Train and a C Train?

An A Train has a self-steering axle, but a C train does not

A C Train does not use an independent converter, but an A Train does

An C Train has only one pintle hitch, but an A Train has two

An A Train has an additional articulation point

31 / 31

Which of the following statements about preventative maintenance plans is false?

On-road inspections received from an enforcement officer must be reported to the carrier

Small defects discovered during an inspection do not need to be reported to the carrier

Every driver is responsible for carrying out inspections required by the owner and required by legislation

Leased vehicles are not exempt from the requirement to follow an established preventative maintenance plan

Your score is

The average score is 65%

Driver's Handbook

Alberta motorcycle learner’s test? Get ready to accelerate your learning with Alberta’s informative and engaging motorcycle video resources. In this short and sweet blog, we’ll explore how these videos can be a valuable tool on your journey to becoming a skilled and responsible rider.

Watch our Videos

Preparing for your Alberta motorcycle learner’s test? Get ready to accelerate your learning with Alberta’s informative and engaging motorcycle video resources. In this short and sweet blog, we’ll explore how these videos can be a valuable tool on your journey to becoming a skilled and responsible rider.